speedy 100 Hz for high Dynamics and Brake Tests

• 100 Hz receiver of the latest generation with best signal quality • native multiband core L1 / L2 / L5 for best reception • high signal sensitivity and lowest noise • RTK-capable receiver with an accuracy of up to 0.01 meters • Dual-Antenna version with Heading and Tilt Angle

• Mount and connect the specially selected antenna • provide Power Supply via vehicle or USB-C • attach to logging system via your preferred interface • choose between 25 Hz or super-fast 100 Hz data rate • 100 Hz RTK for maximum positional accuracy +/- 1 cm • made in rock-solid quality: Lemo Sockets, metal housing

• 25 Hz receiver with maximum sensitivity • Satellite reception: GPS, GLONASS, Galileo, BeiDou • a feature list similar to xproGPS_nano100 but without RTK • extremely high reliability • proven under the toughest operating conditions

100 Hz All-in-one Solution !

Installed in a minute

highest Sensivity for Tests with medium Dynamic

Communication Interfaces and I/Os

Power Supply

Dimensions and Weight

valuable extra Features

Windows Tool for Setup and Logging

• CAN 2.0B / CAN-FD ready with galvanic isolation • USB-C socket also for power supply • COM port RxD / TxD with 115 kBaud • Separate COM port for RTK correction data ( nano100 ) • Analogue output 16-bit resolution • Frequency output

• Power Supply 10...32 VDC and 5 VDC • Power Supply with galvanic isolation • Power Supply via vehicle or USB • Low-power design • Reverse Polarity and EMC protected • Electronic fuse

• Dimensions 114 * 86 * 86 * 26 mm • Weight approx. 240 g • Temperature range -40 ... 85 C°

• Internal 6-axis inertial sensor 2g / 360 degrees / sec • Internal altimeter 300 ... 1100 hPa • Sensor fusion for drop-out compensation • Kalman filter technology • 1 PPS output ( 1 pulse / sec ) • programmable switch output • Angle compensation of the installation position • Marker signal of the trigger button as CAN message • Powerful ARM controller • Status LED for power / number of satellites / RTK • fast cold start • special high-gain antenna for optimal reception • compact and robust design for professional use

• Real-time data logging via USB including xpro Expansion Units • Performance Test module (acceleration, braking etc.) • extensive graphical and spreadsheet evaluation • Export to Excel, Google Earth, OpenStreetMap • Firmware update via USB

Increase Productivity - add xpro GPS to your Test Instrumentation

• our GPS sensors provide information on vehicle speed, position, altitude and more • internal 6D-IMU plus a precision altimeter • Sensor fusion for drop-out compensation • Counter-In, Trigger-In, Analog-Out, PLL-Out, Switch-Out • most standard Interfaces CAN-FD, COM, USB included • Power Supply 9-32V or directly via USB-C

Upgrade your Instrumention with xpro GPS

Great Software Package included

• Software Modules for Vehicle Dynamic Tests and Datalogger • separate Brake Test and Train Evaluation Tool • Real-Time Graphics via USB • Dozens of different Graphics and specific Spreadsheets • Export to MS Excel, Google Earth and OpenStreetMap

Choice of 2 models - both fit to your budget

GPS + IMU + Altimeter

Technical Facts

xpro

©

GPS nano100 - 100 Hz plus Precision RTK

xpro

©

GPS_nano25 - the 25Hz Work Horse

Choose between a 25 Hz or a speedy 100 Hz GPS

www.suchy-data-systems.com

clever testing with xpro

©

PDF Flyer

PDF Flyer

100 Hz - the All-in-one Solution !

Installed in a minute

best Signal Quality - for medium Dynamics

Hardware Add-Ons

upgrade your Loggers with GPS

xpro GPS Speed-Sensor

great Software Package already included

Choose between a 25 Hz or a 100 Hz GPS

GPS + Inertial Sensor + Altimeter

Technical Data

xpro © GPS_nano100 - with RTK

xpro © GPS nano25 - simply top !

valuable Extra Features

• GPS delivers vehicle speed, position, altitude … • internal 6D-IMU and precision altimeter • Sensor fusion for drop-out compensation • Counter-In, Trigger, Analog-Out, PLL-Out, Switch • comes with standard Interfaces CAN, COM, USB • Power Supply 9-32V or directly via USB-C • Galvanic Isolation of Power and CAN

• Software Modules for Vehicle Dynamic and Logging • separate Brake Test and Train Evaluation Tool • Real-Time Graphics via USB • Dozens of Graphics and specific Spreadsheets • Export to Excel, Google Earth and OpenStreetMap

• Mount and connect the specially selected antenna • provide Power Supply via vehicle or USB-C • attach to logging system via preferred interface • choose between 25 Hz or super-fast 100 Hz rate • 100 Hz RTK for positional accuracy of +/- 1 cm • rock-solid quality: Lemo Sockets, metal housing

• 25 Hz receiver with a maximum sensitivity • Satellite reception: GPS, GLONASS, Galileo,BeiDou • features similar to xproGPS_nano100, but no RTK • extremely high reliability • proven under the toughest operating conditions

speedy 100 Hz for high Dynamics

Windows Tool for Setup and Logging

• Internal altimeter 300 ... 1100 hPa • Sensor fusion for GPS drop-out compensation • Kalman filter technology • 1 PPS output ( 1 pulse / sec ) • programmable switch output • Angle compensation of the installation position • timed Trigger Marker signal as CAN message • Powerful ARM controller • Status LEDs for power / number of satellites / RTK • fast cold start • special high-gain antenna for optimal reception • compact and robust design for professional use

• Real-time data logging via USB • logging of xpro Expansion Units supported • Performance Test module • extensive graphical and spreadsheet evaluation • Export to Excel, Google Earth, OpenStreetMap • Firmware update via USB

Communication Interfaces and I/Os

Power Supply

Dimensions and Weight

• Power Supply 10...32 VDC and 5 VDC • Power Supply with galvanic isolation • Power Supply via vehicle or USB • Low-power design • Reverse Polarity and EMC protected • Electronic fuse

• CAN 2.0B / CAN-FD ready with galvanic isolation • USB-C socket also for power supply • COM port RxD / TxD with 115 kBaud • COM port for RTK correction data (nano100) • Analogue output 16-bit resolution • Frequency output

• Dimensions 114 * 86 * 86 * 26 mm • Weight approx. 240 g • Temperature range -40 ... 85 C°

• latest generation 100Hz Receiver • multiband core L1 / L2 / L5 with best results • high signal sensitivity and lowest noise • RTK-capable receiver, accuracy up to 0.01 meters • Dual-Antenna version with Heading and Tilt Angle

PDF Flyer

PDF Flyer

clever testing with xpro

©

Automotive Test Equipment